Commit f06e46

2025-03-13 11:04:37 Leonardo Sobral: input deleted.
Utilidades industriais/Equipamentos/input.md .. /dev/null
@@ 1,323 0,0 @@
-IIP Homework n°1
-
-> **Homework** **n°1** **:** **HydraulicTurbines** *Letourneau* *Lyana*
-> */* *2021257413*
->
-> *Itegration* *and* *Intensification* *of* *Process*
-
-Introduction
-
-I will complete the page on hydraulic turbines, I will refresh or
-complete the data on the page.
-
-And focusing my research and additions on tidal turbines. And finally I
-will also add a section on hydraulics inPortugal.
-
-HydraulicsTurbines
-
-**Hydroelectricity** **in** **the** **history** **and** **in** **the**
-**world**
-
-The use of hydraulic turbines began a long time before hydroelectricity:
-the first watermills appeared in the 1st century, between Greece and
-Turkey, before reaching the Roman and ChineseEmpires in the 3rd century.
-Ahydraulic turbine is a rotating machine that produces mechanical energy
-from moving water, in lakes, rivers or with the tide. So it is a machine
-that converts kinetic energy and potential energy of water into
-mechanical work. It is the essential component of hydroelectric power
-stations intended to produce electricity from a flow of water.
-Subsequently, its use was adapted to directly drive machines in
-factories until they were practically used only to drive electric
-generators.
-
-Hydroelectric energy is one of the oldest sources of electricity
-production, and therefore is very technologically developed. It is today
-by farthe leadingrenewable electrical energy, producing nearly
-83%ofrenewable electricity and 16% of global energy in the world.
-Hydroelectricity is not the “out of date” science that we imagine.
-Today, hydraulic machines are high-tech objects that must meet
-increasingly stringent performance constraints. \[1\]
-
-> 1
-
-<img src="./daetkwsb.png"
-style="width:4.11986in;height:2.47361in" />IIP Homework n°1
-
-> *Figure* *1:* *Global* *Energy* *Mix* *in* *2019*
-> [*<u>link</u>*](https://powertechresearch.com/competing-during-transformation-how-private-equity-firms-are-utilizing-market-research-in-energy-sector/)
-
-**Constitution** **and** **Operating** **Principles**
-
-The water present in a tank located at a higher level (with more energy)
-is circulated to a lower level (with less energy) passing through a set
-of curved blades, nozzles or injectors that transform this energy from
-the water into movement of a rotor,removingenergyand speed from the
-water. These blades can be staticor fixed on therotor, both being
-adjustable so that the flowand power generated can be controlled,
-according to the rotation speed. For its part, the rotoris supported
-axially by thrust and counter thrust bearings and radially by guide
-bearings.
-
-The pipe normally has a final diameter greater than the initial one, in
-order to promote the exit of water with a lower velocity \[2\].
-
-To better understand how a turbine works, consider a Francis turbine,
-illustrated in this video:
-
-[<u>video</u>](https://www.youtube.com/watch?v=Q0F-9HciA-A)
-
-**Types** **of** **turbines**
-
-Different types of turbines are developed to extract mechanical energy
-from hydraulic energy to generate electricity. They are severalwaysto
-classify turbines, but a common way isto classify with the mode ofenergy
-exchange between the water and the turbines. \[1\]
-
-*Impulse* *Turbines*
-
-If the turbine wheel is driven by the kinetic energy of the fluid that
-strikes the turbine blades through the nozzle or otherwise, the turbine
-is known as an impulse turbine.
-
-> These types of turbines are usually suitable for high head and low
-> flow rates.
-
-*Reaction* *Turbines*
-
-If the sum of potential and kinetic energy of water which are due to the
-pressure and velocity, respectively cause the turbine blades to rotate,
-the turbine is classified as a reaction turbine. In these types of
-turbines, all the turbine is immersed in water and changes in water
-pressure with the kinetic energy of the water cause power exchange.
-
-> Those turbines are usually at lower heads and higher flow rates than
-> impulse turbines.
->
-> 2
-
-<img src="./bv1mzvrb.png"
-style="width:1.53153in;height:1.30417in" /><img src="./p42poq4i.png"
-style="width:1.63125in;height:1.61736in" /><img src="./sb3nj3cs.png"
-style="width:1.42639in;height:1.42778in" /><img src="./kmnbgey1.png"
-style="width:1.80069in;height:1.81069in" /><img src="./vmu4ssqb.png"
-style="width:1.75333in;height:1.21667in" /><img src="./xxgyca5s.png"
-style="width:1.49653in;height:1.5875in" />IIP Homework n°1
-
-> 3
-
-<img src="./kkknlexu.png"
-style="width:2.11458in;height:1.73958in" />IIP Homework
-n°1<img src="./foo0ysbp.png"
-style="width:4.84055in;height:3.69444in" /><img src="./3jbcgoym.png"
-style="width:1.15753in;height:0.64583in" />
-
-> *Table* *1* *:* *Types* *of* *turbine*
-
-**Choice** **of** **Turbine** **Type**
-
-Each type of turbine has its advantages depending on the operating
-conditions, and the main objective is always to use the equipment that
-presents the best efficiency for the place where it is installed.
-Furthermore, the choice of turbine type is also influenced by the
-turbine speed, that is, by the number of revolutions per minute of the
-generator driven by theturbine.It isalso worthnotingthat theturbines can
-be mountedin different positions,with theaxisvertical, horizontal or
-even inclined to the vertical in order to satisfy the requirements of
-generated power, water level and space limitations.
-
-> *Figure* *2* *:* *Turbine* *application* *chart*
-> [*<u>link</u>*](https://en.wikipedia.org/wiki/Water_turbine)
-
-The specific speed of a turbine is given by the manufacturers, and
-refers to the point of maximum efficiency, it is the best parameter to
-choose a turbine when conditions of flow and head are established. This
-allows accurate calculations of turbine performance for a range of head
-and flow rates. It can be defined as the speed of an ideal similar
-turbine that would produce one unit of power for one unit of head.
-
-> 4
-
-IIP Homework n°1 with :
-
-Ω: angular velocity (rad/s) P: power (W)
-
-The efficiency of a turbine is given by the ratio between the mechanical
-power provided by the turbine and the existing power in the fluid,
-provided by the hydraulic energy, depending on several variables:
-
-> • Flow
->
-> • Existing losses • Turbine power • Manufacturer • Mounting shaft •
-> Among others
-
-However, hydraulic and mechanical losses are the main causes for the low
-efficiencies in these equipment, and the efficiency of each equipment
-must be maximized according to the conditions in which it will operate
-(flow and losses). The typical efficiencies at which a turbine operates
-vary between 80% and 95%, depending on the flow rate as you can see on
-graphs identical to the one shown in Figure 2 \[3\].
-
-**Advantages** **of** **Using** **Hydraulic** **Energy**
-
-> • Hydraulic energy, a renewable energy source, is a “clean” energy,
-> because it does not pollute the air and water like power plants that
-> use fossil fuels as a source of energy;
->
-> • Hydraulic energy is available when it is needed, and engineers can
-> control water flows through turbines to produce electricity;
->
-> • Hydraulic power stations create large reservoirs (dams) that
-> contribute to the supply of water for public access and flood control;
->
-> • Energy production involves low costs;
->
-> • They work for decades with little maintenance, not requiring much
-> investment to be maintained \[4\].
-
-**Disadvantages** **of** **Using** **Hydraulic** **Energy**
-
-> • Hydraulic power stations can be affected in times of drought and
-> cannot produce electricity.
->
-> • The new hydraulic power stations impact the local environment,
-> destroying ecosystems.
->
-> • Fish populations can be affected, as they can no longer migrate
-> upstream to spawn, or downstream to go to the ocean \[4\].
-
-**Tidal** **Turbines**
-
-From the end of the 19th century, some scientists had the idea of using
-the mechanical energy of ocean currents, but it is only since the
-beginning of the 21st century that this source of energy has begun to be
-studied more seriously: And tidal turbines were born.
-
-> 5
-
-IIP Homework n°1
-
-Tidal energy is often compared to wind energy because of its appearance
-and mode of operation: Concretely, a tidal turbine is composed with a
-rotor, this is the rotating part, with a propeller made up of blades,
-with a diameter between 10 and 20 m, all mounted on a shaft/stator, the
-fixed part. \[5\]
-
-The installation of a tidal turbine can be carried out:
-
-> • On a mast or on a tripod which allows the tidal turbine to be placed
-> on the seabed.
->
-> • If the tidal turbine is placed facing an average sea current of 2.5
-> m/s, i.e. 5 knots, because the tidal turbine operates at full power
-> from 4 knots.
->
-> • If the tidal turbine has a current interception surface of around
-> 300 meters.
-
-The operation of a tidal turbine can be broken down as follows:
-
-> 1\. The sea current causes the rotation of the blades of the
-> propeller, drives a turbine which generates a mechanical movement. The
-> turbine in both directions of the sea current.
->
-> 2\. The rotation of the turbine drives an alternator, which will
-> convert mechanical energy into electricity. 3. This electricity in the
-> form of alternating current is then transported by cables to the
-> surface.
->
-> 4\. The current is then transformed by a converter to be sent to the
-> electrical network.
-
-||
-||
-||
-||
-||
-||
-
-> *Table* *2* *:* *Tidal* *turbines* *advantages* *and* *limits* *\[6\]*
-
-**Au** **Portugal**
-
-In 2019, Portugal had 7,193 MW of hydroelectric power plants, i.e. 2.9%
-of European hydroelectric installed capacity and 0.5% of the world
-total, 19.1% of the country's total electricity production. Its
-production reached 10.6 TWh, or 1.6% of the European total, far behind
-Norway (125.8 TWh), France (63.6 TWh) or Spain (26.4 TWh).
-
-In March 2018, renewable energies produced 100% of electricity
-consumption, including 55% for hydroelectricity in Portugal. \[7\]
-
-> 6
-
-<img src="./mzmejbn4.png"
-style="width:4.11528in;height:3.59569in" />IIP Homework
-n°1<img src="./jdmkn1bv.png"
-style="width:2.44278in;height:1.82431in" /><img src="./fretrb0i.png"
-style="width:1.94514in;height:1.91667in" />
-
-> *Figure* *3* *:* *Portugal* *renewable* *electricity* *productio*[*n*
-> *<u>link</u>*](https://en.wikipedia.org/wiki/Energy_in_Portugal)
-
-Hydroelectric power stations in the country:
-
-> • The Frades II (780 MW) and Foz Tua (270 MW) pumped storage power
-> plants were comissioned in 2017. The Frade II project is one of the
-> main pumped storage projects in Europe. This project was added to the
-> cascade of hydroelectric works Cavado-Rabagao, in the north of the
-> country.
->
-> • The Alqueva dam in the Alentejo created the largest artificial lake
-> in Western Europe and was one of the country's biggest investments.
-> This hydroelectric plant, commissioned in 2004, had a power of 518 MW
-> in 2013.
->
-> • The Aguieira dam, on the Mondego river, was commissioned in 1981, it
-> has an installed capacity of 270 MW with 3 groups of reversible
-> Francis turbines.
->
-> • The Douro hydroelectric development has 6 power stations with a
-> total installed capacity of 3,161 MW. The most important is that of
-> the Aldeadávila dam, inaugurated in 1963, it has a power of 1,140 MW.
-> It is the most powerful power plant in Spain and Portugal.
->
-> • On December 19, 2019, EDP and Engie sign launch the construction of
-> six dams. These six dams, with a total capacity of 1.7 GW, are now in
-> the Douro Valley. EDP therefore remains the leader in hydroelectric
-> energy in Portugal with a market share of 65% in the country.
-
-*Picture* *1* *:* *The* *Alqueva* *dam* *in* *the* *Alentejo* *(* *518*
-*MW)* *Picture* *2* *:* *The* *Aldeadávila* *dam* *in* *the* *Duoro*
-*(1* *140* *MW)*
-
-> 7
-
-IIP Homework n°1
-
-**Some** **Hydraulic** **Turbine** **Manufacturers**
-
-There are several manufacturers of hydraulic turbines, namely Voith,
-Hacker, HISA, Watec-Hydro e.K., among many others that can be found on
-the following website: [<u>Manufacturers of Hydraulic
-Turbines</u>.](https://www.industrystock.es/es/empresas/Tecnolog%C3%ADas-de-accionamiento/Tecnolog%C3%ADas-de-turbinas/Turbinas-hidr%C3%A1ulicas)
-
-**References** Hydraulic Turbine :
-[<u>\[1\]</u>](https://en.wikipedia.org/wiki/Water_turbine)
-[<u>\[2\]</u>](https://pt.wikipedia.org/wiki/Turbina_hidr%C3%A1ulica)
-
-\[3\] [<u>Tipos de
-Turbina</u>](http://www.antonioguilherme.web.br.com/Arquivos/turb_hidro.php)
-
-\[4\] [<u>Vantagens e Desvantagens da Energia
-Hidráulica</u>](http://www.envirothonpa.org/documents/19bHydropowerAdvantagesandDisadvantages.pdf)
-
-\[5\] [<u>Tidal
-turbines</u>](https://www.encyclopedie-energie.org/les-hydroliennes/)
-
-\[6\] [<u>Tidal Turbines
-historic</u>](https://fr.wikipedia.org/wiki/Hydrolienne#Historique)
-
-\[7\] [<u>Hydraulic in
-Portugal</u>](https://en.wikipedia.org/wiki/List_of_hydroelectric_power_stations_in_Portugal)
-
-> 8
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9